Modeling A
==============


Characteristics of modeling
-----------------------------------

We use COQUE_3D elements


Characteristics of the mesh
----------------------------

No4

No1

No3

No2

The coordinates of the main nodes:


.. csv-table::

    "**Knot**", ":math:`{\mathit{Coor}}_{x}` "," :math:`{\mathit{Coor}}_{y}` "," :math:`{\mathit{Coor}}_{z}`"
    ":math:`\mathit{N01}` ", "—500", "866.025", "0."
    ":math:`\mathit{N02}` ", "0", "0", "0", "0."
    ":math:`\mathit{N03}` ", "866.025", "500", "0."
    ":math:`\mathit{N04}` ", "366.025", "1366.025", "0."


The meshes used are:

1 QUAD9 mesh

2 stitches TRIA7


Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", "**Reference**", "**Aster**", "**Difference**"
    ":math:`\mathit{DX}` (:math:`\mathit{No4}`)", "8.66025 E+01", "8.66025 E+01", "4.66 E -05%"
    ":math:`\mathit{DY}` (:math:`\mathit{No4}`)", "50.0", "50.0"," 0%"
    ":math:`\mathit{PK2}` - :math:`\mathit{SIXX}` (:math:`\mathit{M1}`)", "21000. ", "21000. ", "2.04 AND -80%"
    "Cauchy- :math:`\mathit{SIXX}` (:math:`\mathit{M1}`)", "23100. ", "23100. ", "2.14% AND -80%"