Modeling A
==============


Characteristics of modeling
-----------------------------------

3D modeling

Item MECA_HEXA8.


Characteristics of the mesh
----------------------------

Number of knots: 8

Number of meshes and types: 1 HEXA8


Material properties
----------------------

Damaging behavior:

:math:`\begin{array}{c}{\sigma }_{\mathit{seuil}}^{T}\mathrm{=}3\mathit{MPa}\\ {\sigma }_{\mathit{seuil}}^{C}\mathrm{=}11225\mathit{MPa}\\ {E}_{T}\mathrm{=}\mathrm{-}6000\mathit{MPa}\end{array}`


Charging path
--------------------

The element is subjected to uniaxial traction followed by uniaxial discharge and compression.


Tested sizes and results
------------------------------


.. csv-table::

    "**Instant**", "**Field Name**", "**Component**", "**Location**", "**Aster**"
    "24"," DEPL "," :math:`\mathit{DX}` "," "," :math:`\mathit{N2}` ", "—8.006E+06"
    "24"," SIEF_ELGA "," :math:`\mathit{SIXX}` "," "," :math:`\mathit{M1}`, point 1", "—2.03628E+07"
    "24"," VARI_ELGA "," :math:`\mathit{V1}` "," "," :math:`\mathit{M1}`, point 1", "8.14067E-01"