F modeling
==============


Characteristics of modeling
------------------------------------

The model tested is 3D. The law of behavior used is law BETON_DOUBLE_DP. Piloting is validated by elastic prediction.


Characteristics of the mesh
----------------------------

The mesh is obtained by GIBI. It is composed of 10 HEXA8 elements (only one element in the section)


.. image:: images/100000000000033C000001ECA027BEEEFEF4D103.png
    :width: 3.1492in
    :height: 1.8701in


.. _RefImage_100000000000033C000001ECA027BEEEFEF4D103.png:


Tested sizes and results
------------------------------

To validate the solution obtained, we test at order number 41:


1. the following displacement :math:`z` of the face on which the load is imposed,


2. the :math:`\mathit{zz}` constraint in the weakened mesh.


.. csv-table::

    "**Field name**", "**Component**", "**Location**", "**Tolerance**"
    "DEPL ", "DZ", ":math:`E` ", "default"
    "SIEF_ELGA "," SIZZ "," :math:`\mathit{M1}`, point 1", "defect"