C modeling
==============


Characteristics of modeling
------------------------------------

The model tested is 3D. The law of behavior used is law ENDO_ISOT_BETON. Control by deformation is validated.


Characteristics of the mesh
----------------------------

The mesh is obtained by GIBI. It is composed of 10 HEXA8 elements (only one element in the section),


.. image:: images/100000000000033C000001ECA027BEEEFEF4D103.png
    :width: 3.1492in
    :height: 1.8626in


.. _RefImage_100000000000033C000001ECA027BEEEFEF4D103.png:


Tested sizes and results
------------------------------

To validate the solution obtained, we test at order number 41:


1. the following displacement :math:`z` of the face on which the load is imposed,


2. the stress :math:`\mathit{zz}` as well as the damage value in the weakened mesh,


.. csv-table::

    "**Field name**", "**Component**", "**Location**", "**Tolerance**"
    "DEPL ", "DZ", ":math:`E` ", "default"
    "SIEF_ELGA "," SIZZ "," :math:`\mathit{M1}`, point 1", "defect"
    "VARI_ELGA ", "V1"," :math:`\mathit{M1}`, point 1", "defect"