B modeling
==============


Characteristics of modeling
------------------------------------

The modeling tested is AXIS. The law of behavior used is law ENDO_ISOT_BETON. Piloting is validated by elastic prediction.


Characteristics of the mesh
----------------------------

The mesh is obtained by GIBI. It is composed of 10 QUA8 elements.


.. image:: images/100000000000047F0000011588BAFACE84DD1103.png
    :width: 5.1181in
    :height: 1.2165in


.. _RefImage_100000000000047F0000011588BAFACE84DD1103.png:


Tested sizes and results
------------------------------

To validate the solution obtained, we test at order number 7:


1. the following displacement :math:`y` of the face on which the load is imposed,


2. the :math:`\mathit{yy}` stress as well as the damage value in the weakened mesh

.


.. csv-table::

    "**Field name**", "**Component**", "**Location**", "**Tolerance**"
    "DEPL ", "DY", ":math:`\mathit{PB}` ", "default"
    "SIEF_ELGA "," SIYY "," :math:`\mathit{M1}`, point 1", "defect"
    "VARI_ELGA ", "V1"," :math:`\mathit{M1}`, point 1", "defect"