X modeling
==============


Characteristics of modeling
-----------------------------------

The modeling is 3D, only the edge of the frame is represented.


Characteristics of the mesh
----------------------------


.. image:: images/10000000000003DA000003210CDB650DB250FF49.png
    :width: 4.1063in
    :height: 3.4528in


.. _RefImage_10000000000003DA000003210CDB650DB250FF49.png:

Number of knots: 408

Number of meshes and types: 24 HEXA27 for the plate and 8 QUAD9 for the frame.


Tested sizes and results
------------------------------

First calculation (formulation 'CONTINUE', solver 'MULT_FRONT')


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference value**", "**Tolerance**"
    ":math:`\mathit{DX}` at the point :math:`A` instant :math:`1.0` ", "'SOURCE_EXTERNE'", "2.86E-5", "5.0%"
    ":math:`\mathit{DX}` at point :math:`B` instant :math:`1.0` ", "'SOURCE_EXTERNE'", "2.72E-5", "5.0%"
    ":math:`\mathit{DX}` at the point :math:`C` instant :math:`1.0` ", "'SOURCE_EXTERNE'", "2.28E-5", "5.0%"
    ":math:`\mathit{DX}` at point :math:`D` instant :math:`1.0` ", "'SOURCE_EXTERNE'", "1.98E-5", "5.0%"
    ":math:`\mathit{DX}` at the point :math:`E` instant :math:`1.0` ", "'SOURCE_EXTERNE'", "1,5E-5", "5,0%"



notes
---------

The results obtained are close to the external source to within 5% (code mean). The linear solver has no influence on the results.