N modeling ============== Characteristics of modeling ----------------------------------- We use a AXIS model. A single calculation is carried out with Mortar pairing and cutting LAC. Characteristics of the mesh ---------------------------- .. image:: images/100000000000011E000002217BBC865ED10A34C4.png :width: 2.2898in :height: 4.3543in .. _RefImage_100000000000011E000002217BBC865ED10A34C4.png: Knots: 3691. Knits: 1173 QUAD8. The meshes are incompatible at the level of the contact zone. Tested sizes and results ------------------------------ +--------------------------------------------------------------------------------------------------------------------------------------+------------------+-------------------+-------------+ |**Identification** |**Reference type**|**Reference value**|**Tolerance**| +--------------------------------------------------------------------------------------------------------------------------------------+------------------+-------------------+-------------+ | |'ANALYTIQUE' |-2798.3 :math:`N` |5.0% | + .. image:: images/Object_947.svg + + + + | :width: 26 | | | | + :height: 24 + + + + | | | | | + at the point :math:`G` instant :math:`1.0` + + + + | | | | | +--------------------------------------------------------------------------------------------------------------------------------------+------------------+-------------------+-------------+ | |'ANALYTIQUE' |-2798.3 :math:`N` |5.0% | + .. image:: images/Object_951.svg + + + + | :width: 26 | | | | + :height: 24 + + + + | | | | | + At the point :math:`G\text{'}` instant :math:`1.0` + + + + | | | | | +--------------------------------------------------------------------------------------------------------------------------------------+------------------+-------------------+-------------+