E modeling
==============


Characteristics of modeling
-----------------------------------

These are the same modeling characteristics as modeling A.


Characteristics of the mesh
----------------------------

The mesh is adjusted (see []) and includes 3 blocks composed of TRI3 meshes. It has about 4608 elements in total, :math:`32\times 72` along the horizontal and vertical axes, respectively.

The mesh is finer than in the previous tests because we want to avoid a loss of precision.


.. image:: images/100002010000014B000002BF6F5758498545BC42.png
    :width: 1.4835in
    :height: 3.0681in


.. _RefImage_100002010000014B000002BF6F5758498545BC42.png:

Figure 5.2-1: The E modeling mesh


Tested sizes and results
------------------------------

The contact pressure values are tested as for modeling A. The location of the nodes that store the contact degrees of freedom, whose values are tested, is illustrated on the [].


.. csv-table::

    "**No**", "**Identification**", "**Reference**", "**Tolerance**"
    "", "LAGS_C for N2288", "0.0000000E+00", "1.0E-12"
    "", "LAGS_C for N2531", "-6.0789654D+04"," 5.0%"
    "1"," LAGS_C for N2791", "-5.9710311D+04"," 5.0%"
    "", "LAGS_C for N3051", "-5.1197045D+04"," 5.0%"
    "", "LAGS_C for N3311", "0.0000000E+00", "1.0E-12"
    "", "LAGS_C for N2288", "0.0000000E+00", "1.0E-12"
    "", "LAGS_C for N2531", "-3.9911326E+05"," 5.0%"
    "2"," LAGS_C for N2791", "-1.2010508E+05"," 5.0%"
    "", "LAGS_C for N3051", "-1.0176447E+05"," 5.0%"
    "", "LAGS_C for N3311", "0.0000000E+00", "1.0E-12"
    "", "LAGS_C for N2288", "0.0000000E+00", "1.0E-12"
    "", "LAGS_C for N2531", "0.0000000E+00", "1.0E-12"
    "3"," LAGS_C for N2791", "-1.9289294E+05"," 5.0%"
    "", "LAGS_C for N3051", "-1.5195304E+05"," 5.0%"
    "", "LAGS_C for N3311", "0.0000000E+00", "1.0E-12"
    "", "LAGS_C for N2288", "0.0000000E+00", "1.0E-12"
    "", "LAGS_C for N2531", "0.0000000E+00", "1.0E-12"
    "4"," LAGS_C for N2791", "-9.4470171E+05"," 5.0%"
    "", "LAGS_C for N3051", "-2.0680207E+05"," 5.0%"
    "", "LAGS_C for N3311", "0.0000000E+00", "1.0E-12"



.. image:: images/1000020100000203000002C5C45018EC8ECF8BB1.png
    :width: 2.3189in
    :height: 3.1083in


.. _RefImage_1000020100000203000002C5C45018EC8ECF8BB1.png:

Figure 5.3-1: The location of the nodes that store the tested contact degrees of freedom