Modeling A
==============


Characteristics of modeling A
-------------------------------------


.. image:: images/Object_3.svg
    :width: 518
    :height: 336


.. _RefImage_Object_3.svg:

Modeling in plane constraints: C_ PLAN

Loading and boundary conditions are modelled by:


.. code-block:: text

    DDL_IMPO: (NOEUD: N7 X: 0.)

    (NOEUD: N1 DX: 0. OF: 0.)

In order to respect the behavior of the bar as best as possible, the length of the bar is extended and a Young's modulus of :math:`2E7\mathrm{MPa}` is imposed on this excess material.

The other meshes are assigned the nominal value of :math:`200000\mathrm{MPa}`.


Characteristics of the mesh
----------------------------

Number of knots: 21

Number of stitches: 12 MECPQU4


Tested values
---------------


.. csv-table::

    "**Identification**", "**Reference**"
    "", ""
    ":math:`\mathrm{FY}(\mathrm{N7})` to :math:`\mathrm{DX}=-250` ", "1511441"
    ":math:`\mathrm{FY}(\mathrm{N7})` to :math:`\mathrm{DX}=-500`", "2545584"
    ":math:`\mathrm{FY}(\mathrm{N7})` to :math:`\mathrm{DX}=-750`", "3155464"
    ":math:`\mathrm{FY}(\mathrm{N7})` to :math:`\mathrm{DX}=-1050` ", "3401961"
    ":math:`\mathrm{FY}(\mathrm{N7})` to :math:`\mathrm{DX}=-1500`", "2969848"
    ":math:`\mathrm{FY}(\mathrm{N7})` to :math:`\mathrm{DX}=-2000`", "1697056"
    ":math:`\mathrm{FY}(\mathrm{N7})` to :math:`\mathrm{DX}=-2500` ", "0"



notes
---------

Charging is applied with 100 increments.