Modeling A
==============


Characteristics of modeling A
-------------------------------------


.. image:: images/100002000000054A000008006591C8E646940857.png
    :width: 2.6575in
    :height: 2.7846in


.. _RefImage_100002000000054A000008006591C8E646940857.png:

Modeling in plane constraints: C_ PLAN

Loading and boundary conditions are modelled by:


* DDL_IMPO (Knot :math:`\mathit{NO1}` :math:`\mathit{DX}\mathrm{=}0`

:math:`\mathit{DY}\mathrm{=}0`)

(Knot :math:`\mathit{NO4}` :math:`\mathit{DX}\mathrm{=}0`)


* nodal forces imposed on nodes :math:`\mathit{NO2}` and :math:`\mathit{NO3}`


* temperatures imposed on knots

:math:`\mathit{NO1}`, :math:`\mathit{NO4}`: :math:`T\mathrm{=}0°`

:math:`\mathit{NO2}`, :math:`\mathit{NO3}`: :math:`T\mathrm{=}1000°`


Characteristics of the mesh
----------------------------

Number of knots: 4

Number of meshes and types: 1 MECPQU4 with :math:`2\mathrm{\times }2` integration diagram


Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", "**Reference**"
    "", ""
    ":math:`\mathit{SIXX}` (:math:`\mathit{NO1}`)", "200"
    ":math:`\mathit{SIXX}` (:math:`\mathit{NO4}`)", "200"
    ":math:`\mathit{SIXX}` (:math:`\mathit{NO2}`)", "0"
    ":math:`\mathit{SIXX}` (:math:`\mathit{NO3}`)", "0"