K modeling
==============


Characteristics of modeling
-----------------------------------

We use a D_ PLAN_HHO_222 modeling


Characteristics of the mesh
----------------------------

The mesh consists of QUAD8 cells (quadratic quadratic), with a total of 256 elements.


Tested sizes and results
------------------------------

The modeling results are tested against the numerical reference solution presented in :ref:`2 <RefHeading__26035_1128081541>`, and also in non-regression.


.. csv-table::

    "**Location**", "**Instant**", "**Component** (DEPL)", "VALE_REFE ", "**Precision**"
    "Aen node :math:`(\mathrm{48,}60)` "," :math:`t=1s` ", "DX", ":math:`-6.23907\mathit{mm}` "," 2%"
    "Aen node :math:`(\mathrm{48,}60)` "," :math:`t=1s` ", "DY", ":math:`7.00031\mathit{mm}` "," 3%"



.. csv-table::

    "**Identification**", "**Component**", "**Reference Type**", "**Tolerance**"
    "Aen :math:`(\mathrm{48,}60)` node", "DEPL /DX "," NON_REGRESSION "," 0.001%"
    "Aen node :math:`(\mathrm{48,}60)` "," DEPL /DY "," NON_REGRESSION "," 0.001%"
    "Aen node :math:`(\mathrm{48,}60)` "," SIEQ_ELNO/TRSIG "," NON_REGRESSION "," 0.001%"
    "Cen :math:`(\mathrm{24,}30)` node", "DEPL /DX "," NON_REGRESSION "," 0.001%"
    "Cen node :math:`(\mathrm{24,}30)` "," DEPL /DY "," NON_REGRESSION "," 0.001%"
    "Cen node :math:`(\mathrm{24,}30)` "," SIEQ_ELNO/TRSIG "," NON_REGRESSION "," 0.001%"