O modeling
==============


Characteristics of modeling
-----------------------------------

We use 3D modelling_ HHO_222


Characteristics of the mesh
----------------------------

The mesh consists of PENTA6 meshes (linear prisms converted to quadratic prisms by CREA_MAILLAGE), with a total of 512 elements. The formulation is quadratic.


Tested sizes and results
------------------------------

The modeling results are tested against the numerical reference solution presented in :ref:`2 <RefHeading__26035_1128081541>`, and also in non-regression.


.. csv-table::

    "**Location**", "**Instant**", "**Component** (DEPL)", "VALE_REFE ", "**Precision**"
    "Aen node :math:`(\mathrm{48,}60)` "," :math:`t=1s` ", "DX", ":math:`-\mathrm{1,61818}\mathit{mm}` ", "0.01%"
    "Aen node :math:`(\mathrm{48,}60)` "," :math:`t=1s` ", "DY", ":math:`\mathrm{2,13651}\mathit{mm}` ", "0.1%"



.. csv-table::

    "**Identification**", "**Component**", "**Reference Type**", "**Tolerance**"
    "Aen :math:`(\mathrm{48,}60)` node", "DEPL /DX "," NON_REGRESSION "," 0.001%"
    "Aen node :math:`(\mathrm{48,}60)` "," DEPL /DY "," NON_REGRESSION "," 0.001%"
    "Aen node :math:`(\mathrm{48,}60)` "," SIEQ_ELNO/TRSIG "," NON_REGRESSION "," 0.001%"
    "Cen :math:`(\mathrm{24,}30)` node", "DEPL /DX "," NON_REGRESSION "," 0.001%"
    "Cen node :math:`(\mathrm{24,}30)` "," DEPL /DY "," NON_REGRESSION "," 0.001%"
    "Cen node :math:`(\mathrm{24,}30)` "," SIEQ_ELNO/TRSIG "," NON_REGRESSION "," 0.001%"