E modeling
==============


Characteristics of modeling
-----------------------------------

We use 3D modelling_ INCO_UPG


Characteristics of the mesh
----------------------------

The mesh consists of 512 HEXA20 meshes.


.. image:: images/1000020100000326000002BF62C07576453ED0A1.png
    :width: 1.9862in
    :height: 2.0402in


.. _RefImage_1000020100000326000002BF62C07576453ED0A1.png:


Tested sizes and results
------------------------------

The modeling results are tested against the numerical reference solution presented in :ref:`2 <RefHeading__26035_1128081541>`, and also in non-regression.


.. csv-table::

    "**Location**", "**Instant**", "**Component** (DEPL)", "VALE_REFE ", "**Precision**"
    "Aen node :math:`(\mathrm{48,}\mathrm{60,}0.5)` "," :math:`t=1s` ", "DX", ":math:`-\mathrm{1,61818}\mathit{mm}` ", "9%"
    "Aen node :math:`(\mathrm{48,}\mathrm{60,}0.5)` "," :math:`t=1s` ", "DY", ":math:`\mathrm{2,13651}\mathit{mm}` "," 9%"
    "Aen node :math:`(\mathrm{48,}\mathrm{60,}0.5)` "," :math:`t=1s` ", "DZ", ":math:`0\mathit{mm}` ", "0%"



.. csv-table::

    "**Identification**", "**Component**", "**Reference Type**", "**Tolerance**"
    "Aen :math:`(\mathrm{48,}\mathrm{60,}0.5)` node", "DEPL /DX "," NON_REGRESSION "," 0.001%"
    "Aen node :math:`(\mathrm{48,}\mathrm{60,}0.5)` "," DEPL /DY "," NON_REGRESSION "," 0.001%"
    "Aen node :math:`(\mathrm{48,}\mathrm{60,}0.5)` "," DEPL /DZ "," NON_REGRESSION "," 0.001%"
    "Aen node :math:`(\mathrm{48,}\mathrm{60,}0.5)` "," SIEQ_ELNO/TRSIG "," NON_REGRESSION "," 0.001%"
    "Cen :math:`(\mathrm{24,}\mathrm{30,}0)` node", "DEPL /DX "," NON_REGRESSION "," 0.001%"
    "Cen node :math:`(\mathrm{24,}\mathrm{30,}0)` "," DEPL /DY "," NON_REGRESSION "," 0.001%"
    "Cen node :math:`(\mathrm{24,}\mathrm{30,}0)` "," DEPL /DZ "," NON_REGRESSION "," 0.001%"
    "Cen node :math:`(\mathrm{24,}\mathrm{30,}0)` "," SIEQ_ELNO/TRSIG "," NON_REGRESSION "," 0.001%"