D modeling ============== Characteristics of modeling ----------------------------------- We use a D_ PLAN_HHO_121 modeling Characteristics of the mesh ---------------------------- The mesh consists of TRIA6 cells (quadratic triangle), with a total of 512 elements. Tested sizes and results ------------------------------ The modeling results are tested against the numerical reference solution presented in :ref:`2 `, and also in non-regression. .. csv-table:: "**Location**", "**Instant**", "**Component** (DEPL)", "VALE_REFE ", "**Precision**" "Aen node :math:`(\mathrm{48,}60)` "," :math:`t=1s` ", "DX", ":math:`-\mathrm{1,61818}\mathit{mm}` ", "3%" "Aen node :math:`(\mathrm{48,}60)` "," :math:`t=1s` ", "DY", ":math:`\mathrm{2,13651}\mathit{mm}` "," 4%" .. csv-table:: "**Identification**", "**Component**", "**Reference Type**", "**Tolerance**" "Aen :math:`(\mathrm{48,}60)` node", "DEPL /DX "," NON_REGRESSION "," 0.001%" "Aen node :math:`(\mathrm{48,}60)` "," DEPL /DY "," NON_REGRESSION "," 0.001%" "Aen node :math:`(\mathrm{48,}60)` "," SIEQ_ELNO/TRSIG "," NON_REGRESSION "," 0.001%" "Cen :math:`(\mathrm{24,}30)` node", "DEPL /DX "," NON_REGRESSION "," 0.001%" "Cen node :math:`(\mathrm{24,}30)` "," DEPL /DY "," NON_REGRESSION "," 0.001%" "Cen node :math:`(\mathrm{24,}30)` "," SIEQ_ELNO/TRSIG "," NON_REGRESSION "," 0.001%" "M200 mesh, Point 1", "EPSP_ELGA "," NON_REGRESSION "," 0.001%" "M200 mesh, Point 1", "EPSI_ELGA "," NON_REGRESSION "," 0.001%" "M200 mesh, Point 1", "COOR_ELGA "," NON_REGRESSION "," 0.001%"