v6.03.176 SSNP176 — Type D_ PLAN_INCO_ * modeling in almost incompressible elasticity

Summary:

The objective of this test is to provide an additional verification of D_ PLAN_INCO_ * models on a model whose analytical solution is known.

It consists of two models:

• Modeling A: test on modeling D_ PLAN_INCO_UPO (therefore on linear elements)

• B modeling: test on D_ PLAN_INCO_UPet D_ PLAN_INCO_UPG models (on quadratic elements)

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
  • 2.3. Uncertainties about the solution
  • 2.4. Bibliographical reference
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. Summary of results