Modeling A
==============


Characteristics of modeling
-----------------------------------

We use a D_ PLAN_INCO_UPO modeling.


Characteristics of the mesh
----------------------------

The mesh consists of QUAD4 cells (linear quadrangle), with a total of 15360 elements.


Tested sizes and results
------------------------------

The modeling results are tested with respect to the analytical reference solution presented in :ref:`2 <RefHeading__26035_1128081541>`, and also in non-regression. The pressure is not tested because this degree of freedom is not supported by the elements of a modeling * _ INCO_UPO.


.. csv-table::

    "**Location**", "**Instant**", "**Component** (DEPL)", "VALE_REFE ", "**Precision**"
    "Node PT_ben :math:`(\mathrm{0.5,}0.5)` "," :math:`t=1s` "," ", "DX", ":math:`-0.052734375\mathit{mm}` ", "1.0E-6"
    "PT_ben node :math:`(\mathrm{0.5,}0.5)` "," :math:`t=1s` "," ", "DY", ":math:`0.052734375\mathit{mm}` ", "1.0E-6"



.. csv-table::

    "**Identification**", "**Reference type**"
    "PT_B node— DEPL /DX "," NON_REGRESSION"
    "PT_B node— DEPL /DY "," NON_REGRESSION"