D modeling
==============


Characteristics of modeling
-----------------------------------

A D_ PLAN modeling is used for solid elements with the CONTINUE method for the treatment of CONTACT with MORTAR pairing and LAC division.


Characteristics of the mesh
----------------------------

The mesh contains 244 elements of type QUAD8. The meshes of the 2 contact surfaces are incompatible.


.. image:: images/100000000000011700000218006E0A34A7E1645E.png
    :width: 1.9925in
    :height: 3.8209in


.. _RefImage_100000000000011700000218006E0A34A7E1645E.png:


Tested sizes and results
------------------------------

The contact pressure is tested on all the master and slave contact surfaces, as well as the components of field CONT_ELEM.


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference value**", "**Precision**"
    "LAGS_C ", "'ANALYTIQUE'", "-25.0"," 0.1%"
    "CONT_ELEM/PRES ", "'ANALYTIQUE'", "-25.0"," 0.1%"
    "CONT_ELEM/JEU ", "'ANALYTIQUE'", "0.0", "0.001"
    "CONT_ELEM/CONT ", "'ANALYTIQUE'", "1", "0.1%"
    "CONT_ELEM/COEFSURF ", "'NON_REGRESSION'", "1.0"," 0.0001%"
    "CONT_ELEM/PRESCOOR ", "'NON_REGRESSION'", "-25.0"," 0.0001%"



.. _ddelink__1470_771223978: