Modeling A
==============

Characteristics of modeling
-----------------------------------

The modeling used in the test case is as follows: **Elements** **2D 'C_ PLAN '(QUA4)**


.. image:: images/10000000000001540000011994B642EC080F6174.png
    :width: 2.8228in
    :height: 2.3319in


.. _RefImage_10000000000001540000011994B642EC080F6174.png:

**Figure** 3.1-a **: Geometry and mesh of the modeling used.**

Cutting: 1 QUAD4 mesh along the :math:`x` axis

         1 QUAD4 mesh along the :math:`y` axis

Knots:

:math:`A`: knit :math:`\mathrm{M1}` knot :math:`\mathrm{N1}`

:math:`B`: knit :math:`\mathrm{M1}` knot :math:`\mathrm{N2}`

:math:`C`: knit :math:`\mathrm{M1}` knot :math:`\mathrm{N3}`

:math:`D`: knit :math:`\mathrm{M1}` knot :math:`\mathrm{N4}`


Characteristics of the mesh
----------------------------

Number of knots: 4

Number of meshes and types: 1 QUAD4, 3 SEG2.


Tested sizes and results
------------------------------

.. csv-table::

    "**Identification**", "**Field**", "**Size**", "**Reference**", "**Tolerance**"
    "t=20 M1 Point 1"," SIEF_ELGA "," SIYY "," ", "-2.20348E+02", "1.0E -04%"
    "t=120 M1 Point 1"," SIEF_ELGA "," SIYY "," ", "-8.73333E-04", "1.0E -04%"
    "t=160 M1 Point 1"," SIEF_ELGA "," SIYY "," ", "-2.22222E+02", "1.0E -04%"
    "t=200 M1 Point 1"," SIEF_ELGA "," SIYY "," ", "-2.22222E+02", "1.0E -04%"
    "t=90 M1 Point 1"," VARI_ELGA "," ", "V1", "4.76458E-03", "1.0E -04%"
    "t=100 M1 Point 1"," VARI_ELGA "," ", "V1", "5.38907E-03", "1.0E -04%"
    "t=110 M1 Point 1"," VARI_ELGA "," ", "V2", "1.30893E+03", "1.0E -04%"
    "t=200 M1 Point 1"," VARI_ELGA "," ", "V2", "2.31584E+04", "1.0E -04%"
    "t=200 M1 Point 1"," VARI_ELGA "," ", "V4", "6.66667E-02", "1.0E -04%"
    "t=110 M1 Point 1"," VARI_ELGA "," ", "V3", "9.26799E-04", "1.0E -04%"
    "t=200 M1 Point 1"," VARI_ELGA "," ", "V3", "6.64753E-02", "1.0E -04%"