Modeling A
==============


Characteristics of modeling A
-------------------------------------

Mechanics: C_ PLAN modeling

Thermal: modeling PLAN_DIAG


Characteristics of the mesh
----------------------------

A QUAD4 element. Number of knots: 4


Tested sizes and results
------------------------------

Since the analytical solution is obtained as a function of the plastic deformation, this value is first tested as a function of time, then the hydrogen concentration as a function of time:


.. csv-table::

    "**Identification**", "**Instant**", "**Reference**", "**Tolerance %**"
    "P1", "11000000.0", "0.0198"," 0.10%"
    "P1", "11500000.0", "0.0297"," 0.10%"
    "P1", "12000000.0", "0.0396"," 0.10%"
    "P1", "12500000.0", "0.0495"," 0.10%"
    "P1", "13000000.0", "0.0594"," 0.10%"
    "P1", "15100000.0", "0.100980"," 0.10%"
    "P1", "20000000.0", "0.1980"," 0.10%"
    "CT2 ", "11000000.0", "0.5058"," 0.10%"
    "CT2 ", "11500000.0", "0.6522"," 0.3%"
    "CT2 ", "12000000.0", "0.8239"," 0.4%"
    "CT2 ", "12500000.0", "0.964"," 1.0%"
    "CT2 ", "13000000.0", "0.989"," 0.4%"
    "CT2 ", "15100000.0", "0.99807"," 0.10%"
    "CT2 ", "20000000.0", "0.999628"," 0.10%"



.. image:: images/10000000000014F700000BC09F2987C628A17385.png
    :width: 5.5752in
    :height: 3.6102in


.. _refImage_10000000000014f700000 BC09F2987C628A17385 .png: