v6.03.158 SSNP158 — Non-linear mesh adaptation

Summary:

This test \(\mathrm{2D}\) in quasi-static plane constraints makes it possible to illustrate on a simple case the problem of mesh adaptation in a non-linear way.

It uses the elements presented in the documentation [U2.08.09] « Non-linear mesh adaptation », i.e. the various phases of resolution, adaptation, projection and balancing.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Boundary conditions and loads
  • 1.3. Material properties
• 2. Benchmark solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. Summary of results