B modeling
==============


Characteristics of modeling
-----------------------------------

The entire domain is meshed into 6-node triangular elements. The mesh has 620 triangles and 64 segments.

1 time step of 1 s is modelled.

3.2 Results

In the figures and respectively, the horizontal displacements DX and the damage criterion (internal variable V1) are plotted at the end of :math:`\mathrm{1s}`.

We see a crack that starts at :math:`2/3` of the domain (when V1 is equal to 1, the material is broken).

The form of the results is logically dependent on the mesh.


.. image:: images/1000020100000302000002322A91840C44C59015.png
    :width: 2.3626in
    :height: 1.7244in


.. _RefImage_1000020100000302000002322A91840C44C59015.png:

Figure 5: Horizontal displacements :math:`\mathit{DX}`, :math:`t\mathrm{=}\mathrm{1s}`


.. image:: images/10000201000002EC0000024BCF8E219F0B32F27A.png
    :width: 2.3626in
    :height: 1.8543in


.. _RefImage_10000201000002EC0000024BCF8E219F0B32F27A.png:

Figure 6: Damage variable (:math:`\mathit{V1}`), :math:`t\mathrm{=}\mathrm{1s}`

Tested values
---------------

The displacement value is tested at point :math:`\mathit{testpn}` defined above.


.. csv-table::

    "**Location**", "**Component**", "**instant**", "**Non-regression value**", "**Tolerance (%)**"
    ":math:`\mathit{testpn}` "," :math:`\mathit{DX}` ", "1", "9.114E5", "1.E-3"