H modeling
==============


Characteristics of H modeling
-------------------------------------

The characteristics of the modeling are strictly identical to those of modeling :math:`E`. Only the cohesive law differs: the CZM_LIN_REG law is used.


Characteristics of the mesh
----------------------------

The mesh is the same as in modeling :math:`E`. Recall that it is consistent with the crack.

Volume elements (:math:`\mathit{DCB}`): 804 TRI3.


H modeling results
------------------------------

Modeling :math:`A` is used as a reference. The results are perfectly repeatable.


.. csv-table::

    "**Size tested**", "**Reference type**", "**Code_Aster**", "**Tolerance (** :math:`\text{\%}` **)**) **"
    ":math:`U` at the moment 50"," AUTRE_ASTER ", "3.3166D-03", "0.10"
    ":math:`F` at time 50"," AUTRE_ASTER ", "4.26153D+07", "0.10"
    ":math:`U` at time 100"," AUTRE_ASTER ", "1.29488D-03", "0.10"
    ":math:`F` at time 100"," AUTRE_ASTER ", "2.73873D+06", "0.10"
    ":math:`U` at the moment 150"," AUTRE_ASTER ", "6.45752D-03", "0.10"
    ":math:`F` at the moment 150"," AUTRE_ASTER ", "7.87206D+06", "0.10"