D modeling
==============


Characteristics of modeling
-----------------------------------

The modeling is two-dimensional elastic with plane constraints C_ PLAN.


Characteristics of the mesh
----------------------------

Number of knots 331

Number of SEG3 46

Number of TRIA6 26

Number of QUAD8 84


.. image:: images/1000000000000397000002110CF3C2742C41E181.png
    :width: 5.5118in
    :height: 2.8744in


.. _RefImage_1000000000000397000002110CF3C2742C41E181.png:


Tested sizes and results
------------------------------

Field SING_ELEM:


.. csv-table::

    "**Identification**", "**Instant**", "**Type**", "**Reference**", "**Tolerance**"
    "DEGRE MAX ", "1.0", "'ANALYTIQUE'", "2.0"," 1.0%"
    "DEGRE MIN ", "1.0", "'NON_REGRESSION'", "''", "0.51"," 1.0%"
    "RAPPORT MAX ", "1.0", "'NON_REGRESSION'", "''", "1.15"," 2.0%"
    "RAPPORT MIN ", "1.0", "'NON_REGRESSION'", "''", "0.16"," 2.0%"
    "TAILLE MAX ", "1.0", "'NON_REGRESSION'", "''", "4.56"," 2.0%"
    "TAILLE MIN ", "1.0", "'NON_REGRESSION'", "''", "0.259"," 2.0%"



.. csv-table::

    "**Identification**", "**Instant**", "**Type**", "**Reference**", "**Tolerance**"
    "DEGRE M30", "1.0", "'NON_REGRESSION'", "0.81"," 1.0%"
    "DEGRE M31", "1.0", "'NON_REGRESSION'", "0.51"," 1.0%"
    "DEGRE M32", "1.0", "'NON_REGRESSION'", "0.51"," 1.0%"
    "DEGRE M33", "1.0", "'NON_REGRESSION'", "0.650"," 1.0%"
    "DEGRE M55", "1.0", "'NON_REGRESSION'", "0.84"," 1.0%"
    "DEGRE M56", "1.0", "'NON_REGRESSION'", "0.6"," 1.0%"
    "DEGRE M57", "1.0", "'NON_REGRESSION'", "0.6"," 1.0%"
    "DEGRE M58", "1.0", "'NON_REGRESSION'", "0.7"," 2.0%"


Field SING_ELNO:


.. csv-table::

    "**Identification**", "**Instant**", "**Type**", "**Reference**", "**Tolerance**"
    "DEGRE MAX ", "1.0", "'ANALYTIQUE'", "2.0"," 1.0%"
    "DEGRE MIN ", "1.0", "'NON_REGRESSION'", "''", "0.51"," 1.0%"
    "RAPPORT MAX ", "1.0", "'NON_REGRESSION'", "''", "1.15"," 2.0%"
    "RAPPORT MIN ", "1.0", "'NON_REGRESSION'", "''", "0.16"," 2.0%"
    "TAILLE MAX ", "1.0", "'NON_REGRESSION'", "''", "4.56"," 2.0%"
    "TAILLE MIN ", "1.0", "'NON_REGRESSION'", "''", "0.259"," 2.0%"