Modeling A
==============


Characteristics of modeling
-----------------------------------

The modeling is two-dimensional elastic with plane constraints C_ PLAN.


Characteristics of the mesh
----------------------------

Number of knots 136

Number of SEG2 46

Number of TRIA3 244


.. image:: images/10000000000003C50000026B0EF8DD3B09A1D57B.png
    :width: 5.5118in
    :height: 3.5311in


.. _RefImage_10000000000003C50000026B0EF8DD3B09A1D57B.png:


Tested sizes and results
------------------------------

Field SING_ELEM:


.. csv-table::

    "**Identification**", "**Instant**", "**Type**", "**Reference**", "**Tolerance**"
    "DEGRE MAX ", "1.0", "'ANALYTIQUE'", "''", "1.0", "1.0E -04%"
    "DEGRE MIN ", "1.0", "'ANALYTIQUE'", "''", "0.5", "1.0E -04%"
    "RAPPORT MAX ", "1.0", "'NON_REGRESSION'", "''", "7.3626"," 0.20%"
    "RAPPORT MIN ", "1.0", "'NON_REGRESSION'", "1.0310"," 0.20%"
    "TAILLE MAX ", "1.0", "'NON_REGRESSION'", "''", "1.6918"," 0.20%"
    "TAILLE MIN ", "1.0", "'NON_REGRESSION'", "''", "0.0295"," 0.20%"



.. csv-table::

    "**Identification**", "**Instant**", "**Type**", "**Reference**", "**Tolerance**"
    "DEGRE M142", "1.0", "'NON_REGRESSION'", "0.687"," 0.20%"
    "DEGRE M143", "1.0", "'NON_REGRESSION'", "''", "0.5", "1.0E -04%"
    "DEGRE M144", "1.0", "'NON_REGRESSION'", "''", "0.5", "1.0E -04%"
    "DEGRE M145", "1.0", "'NON_REGRESSION'", "''", "0.5", "1.0E -04%"
    "DEGRE M146", "1.0", "'NON_REGRESSION'", "0.5842"," 1.5%"
    "DEGRE M189", "1.0", "'NON_REGRESSION'", "0.6870"," 0.20%"
    "DEGRE M190", "1.0", "'NON_REGRESSION'", "0.6870"," 0.20%"
    "DEGRE M191", "1.0", "'NON_REGRESSION'", "0.5842"," 1.5%"


Field SING_ELNO:


.. csv-table::

    "**Identification**", "**Instant**", "**Type**", "**Reference**", "**Tolerance**"
    "DEGRE MAX ", "1.0", "'ANALYTIQUE'", "''", "1.0", "1.0E -04%"
    "DEGRE MIN ", "1.0", "'ANALYTIQUE'", "''", "0.5", "1.0E -04%"
    "RAPPORT MAX ", "1.0", "'NON_REGRESSION'", "''", "7.3626"," 0.20%"
    "RAPPORT MIN ", "1.0", "'NON_REGRESSION'", "1.0310"," 0.20%"
    "TAILLE MAX ", "1.0", "'NON_REGRESSION'", "''", "1.6918"," 0.20%"
    "TAILLE MIN ", "1.0", "'NON_REGRESSION'", "''", "0.0295"," 0.20%"