Modeling A
==============


Characteristics of modeling
-----------------------------------

The modeling is two-dimensional with D_ PLAN plane deformations with Drucker-Prager behavior associated with linear negative work hardening.


Characteristics of the mesh
----------------------------

Number of knots: 661

Number of SEG3: 60

Number of QUAD8: 200

Number of group of elements: 5


Tested sizes and results
------------------------------


.. csv-table::

    "**Gauss points**", "**Field component** INDL_ELGA ", "**Reference**", "**Precision**"
    "1"," INDICE ", "1,0", "1E-3"
    "1"," DIR1 ", "-32,0279", "1E-3"
    "2"," INDICE ", "1,0", "1E-3"
    "2"," DIR2 ", "30,8960", "1E-3"
    "3"," INDICE ", "1,0", "1E-3"
    "3"," DIR3 ", "-26,8726", "1E-3"
    "4"," INDICE ", "1,0", "1E-3"
    "4"," DIR4 ", "-24,8401", "1E-3"
    "5"," INDICE ", "1,0", "1E-3"
    "6"," INDICE ", "1,0", "1E-3"
    "7"," INDICE ", "1,0", "1E-3"
    "8"," INDICE ", "1,0", "1E-3"
    "9"," INDICE ", "1,0", "1E-3"
    "1"," INDICE ", "1,0", "1E-3"
    "1"," DIR1 ", "31.4075", "1E-3"
    "1"," INDICE ", "1,0", "1E-3"
    "1"," DIR1 ", "-32,6792", "1E-3"
    "2"," INDICE ", "1,0", "1E-3"
    "2"," DIR2 ", "32,2241", "1E-3"
    "3"," INDICE ", "1,0", "1E-3"
    "3"," DIR3 ", "21,9077", "1E-3"
    "4"," INDICE ", "1,0", "1E-3"
    "4"," DIR4 ", "-17,7869", "1E-3"
    "5"," INDICE ", "1,0", "1E-3"
    "6"," INDICE ", "1,0", "1E-3"
    "7"," INDICE ", "1,0", "1E-3"
    "8"," INDICE ", "1,0", "1E-3"
    "9"," INDICE ", "1,0", "1E-3"
    "1"," INDICE ", "1,0", "1E-3"
    "1"," DIR1 ", "33,4990", "1E-3"



.. csv-table::

    "**Gauss points**", "**Field component** PDIL_ELGA ", "**Reference**", "**Precision**"
    "1", "A1_ LC2 ", "7.67142E+05", "1E-3"