Modeling A
==============


Characteristics of modeling
-----------------------------------

A D_ PLAN modeling is used for solid elements with the CONTINUE method for the treatment of CONTACT with 'SIMPSON2' integration.


Characteristics of the mesh
----------------------------


.. csv-table::

    "Number of nodes:", "313"
    "Number of meshes and types:", "265 QUAD4et 132 SEG2"


The meshes of the 2 contact surfaces are incompatible. 12 finite elements SEG2 are arranged on the initial contact surface of the plate 1 and only 11 on the contact surface of the other surface.

By activating the SIMPSON2 keyword, three sub-elements are used to integrate contact terms.


Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", "**Reference Value**", "**Reference Type**", "**Tolerance**"
    "LAGS_Cau node :math:`\mathit{N14}` ", "—1.E+5", "'ANALYTIQUE'", "1%"
    "LAGS_Cau point :math:`A` ", "—1.E+5", "'ANALYTIQUE'", "1%"
    "LAGS_Cau point :math:`B` ", "—1.E+5", "'ANALYTIQUE'", "1%"
    "DYau node :math:`\mathit{N14}` ", "-0.05", "'ANALYTIQUE'", "1%"
    "DYau point :math:`A` ", "-0.05", "'ANALYTIQUE'", "1%"
    "DYau point :math:`B` ", "-0.05", "'ANALYTIQUE'", "1%"