F modeling
==============

Validation of the 3D joint PENTA6 with the cohesive law CZM_LIN_REG


Characteristics of modeling
-----------------------------------

3D modeling for the elastic element.

3D modeling_ JOINT for the joint element


Characteristics of the mesh
----------------------------

Number of knots: 9

The elastic element is a PENTA6.

The joint element is a degenerate PENTA6 (knots combined).


Tested sizes and results
-------------------------------

The remark on control mentioned for modeling A also applies to this modeling.

**Fashion** :math:`I`


.. csv-table::

    "**Size tested**", "**Reference**", "**Tolerance (** :math:`\text{\%}` **)**"
    "DXsur Node 2", "2.16506D-08", "0.10"
    "SIXX ", "9.27629539D-02", "0.10"
    "SIGN ", "5.4887555D-01", "0.10"
    "SITX ", "0.D+00", "0.10"
    "SITY ", "0.D+00", "0.10"


**Fashion** :math:`\mathit{II}`


.. csv-table::

    "**Size tested**", "**Reference**", "**Tolerance (** :math:`\text{\%}` **)**"
    "SIGN ", "0.D+00", "0.10"
    "SITX ", "4.3314616D-01", "0.10"
    "SITY ", "0.D+00", "0.10"


**Fashion** :math:`\mathit{III}`


.. csv-table::

    "**Size tested**", "**Reference**", "**Tolerance (** :math:`\text{\%}` **)**"
    "SIGN ", "0.D+00", "0.10"
    "SITX ", "0.D+00", "0.10"
    "SITY ", "2.931186D-01", "0.10"