3. Modeling A

3.1. Characteristics of modeling

3.2. Characteristics of the mesh

Number of knots: 1072

Number of meshes and types:	100 QUAD9
	100 QUAD8
	200 TRIA6

3.3. Tested sizes and results

Identification	Reference type	Value
Cumulative plastic deformation Node \({N}_{2}\) at order number 10	“AUTRE_ASTER”	0.0
Cumulative plastic deformation Node \({N}_{3}\) at order number 10	“AUTRE_ASTER”	6.16E-2
Plastic deformation Node \({N}_{2}\) with order number 10	“AUTRE_ASTER”	0.0
Plastic deformation Node \({N}_{3}\) with order number 10	“AUTRE_ASTER”	-6.16E-2
Constraints at Node \({N}_{2}\) at order number 10	“AUTRE_ASTER”	0.0
Constraints at Node \({N}_{3}\) at order number 10	“AUTRE_ASTER”	-300.0

The discharge and radiality loss indicators are calculated in cell \({M}_{1}\):

• at the first Gauss point (DERA_ELGA),

• at node \({N}_{601}\) (DERA_ELNO).

Identification	Reference type	Value
Discharge to the first Gauss point of mesh \({M}_{1}\) at order number 7	“NON_REGRESSION”	8.67857E-1
Unload at node \({N}_{601}\) of mesh \({M}_{1}\) at order number 7	“NON_REGRESSION”	8.91978E-1
Radiality loss at the first Gauss point of mesh \({M}_{1}\) at order number 7	“NON_REGRESSION”	3.39734E-3