B modeling: D_ PLAN
=======================

The analysis is static with linear elastic behavior, modeling D_ PLAN.




Optimization settings
----------------------------

The values of the parameters are the same as for plane stress modeling.




Basic structure built
----------------------------

The basic structure is thus built within the macro command CALC_BT based on the results of the 2D modeling and considering the parameters defined previously.


.. image:: images/100000000000054600000440BBC1BFBE63C357E8.png
    :width: 3.7965in
    :height: 3.0591in


.. _RefImage_100000000000054600000440BBC1BFBE63C357E8.png:

Picture 3.2-1




Optimization SCHEMA = 'SECTION'
-------------------------------


.. image:: images/100000000000064400000448096DFB3881C8AE50.png
    :width: 4.398in
    :height: 3.0047in


.. _RefImage_100000000000064400000448096DFB3881C8AE50.png:

Picture 3.3-1


.. csv-table::

    "#", "COORD
    XI", "COORD
    YI", "COORD
    XJ", "COORD
    YJ", "TYPE ", "N", "N", "A", "L", "ENEL_ELEM"
    "B5", "0.00", "0.00", "0.00", "0.10", "0.10", "0.05"," BIELLE ", "0.00E+00", "1.00E-06", "0.11", "0.11", "0.00E+00"
    "B2", "0.00", "0.00", "0.00", "0.15", "0.15", "0.95"," BIELLE ", "-2.18E+06", "6.24E-02", "0.96", "0.96", "3.50E+04"
    "B3", "0.00", "0.00", "0.00", "0.95", "0.95", "0.00"," BIELLE ", "0.00E+00", "1.00E-06", "0.95", "0.95", "0.00E+00"
    "B1", "0.00", "0.00", "0.00", "0.00", "0.00", "1.00"," BIELLE ", "-1.00E+06", "2.86E-02", "1.00", "1.00", "1.67E+04"
    "T4", "0.10", "0.05", "0.05", "0.15", "0.15", "0.95"," TIRANT ", "1.06E-02", "1.00E-06", "0.90", "0.90", "4.83E-09"
    "B4", "0.10", "0.05", "0.05", "0.95", "0.95", "0.00"," BIELLE ", "0.00E-06", "0.85", "0.85", "0.00E+00"
    "T3", "0.10", "0.05", "0.05", "0.00", "0.00", "1.00"," TIRANT ", "1.16E-02", "1.00E-06", "0.96", "0.96", "6.12E-09"
    "T2", "0.15", "0.95", "0.95", "0.95", "0.95", "0.00"," TIRANT ", "4.13E+06", "8,26E-03", "1.24", "1.24", "1.24", "1.22E+05"
    "T5", "0.15", "0.95", "0.95", "0.00", "0.00", "1.00"," TIRANT ", "3.16E+06", "6.32E-03", "0.16", "0.16", "1.16", "1.19E+04"
    "T1", "0.95", "0.00", "0.00", "0.00", "0.00", "1.00"," TIRANT ", "5.80E-02", "1.00E-06", "1.38", "1.38", "2.21E-07"


**Table** 3.3-1 *\*.** Optimized structure:D_ PLAN, SCHEMA = SECTION




Optimization SCHEMA = 'TOPO'
----------------------------


.. image:: images/100000000000061C000004425E260EBA2F637F4F.png
    :width: 4.3701in
    :height: 3.0453in


.. _RefImage_100000000000061C000004425E260EBA2F637F4F.png:

Picture 3.4-1


.. csv-table::

    "#", "COORD
    XI", "COORD
    YI", "COORD
    XJ", "COORD
    YJ", "TYPE ", "N", "N", "A", "L", "ENEL_ELEM"
    "B1", "0.00", "0.00", "0.00", "0.15", "0.15", "0.95"," BIELLE ", "-2.18E+06", "6.24E-02", "0.96", "0.96", "3.50E+04"
    "B2", "0.00", "0.00", "0.00", "0.00", "0.00", "1.00"," BIELLE ", "-1.00E+06", "2.86E-02", "1.00", "1.00", "1.67E+04"
    "T1", "0.15", "0.95", "0.95", "0.95", "0.95", "0.00"," TIRANT ", "4.13E+06", "8,26E-03", "1.24", "1.24", "1.24", "1.22E+05"
    "T2", "0.15", "0.95", "0.95", "0.00", "0.00", "1.00"," TIRANT ", "3.16E+06", "6.32E-03", "0.16", "0.16", "1.16", "1.19E+04"
    "T3", "0.95", "0.00", "0.00", "0.00", "0.00", "1.00"," TIRANT ", "5.80E-02", "1.00E-06", "1.38", "1.38", "2.21E-07"
    "T4", "0.10", "0.05", "0.05", "0.00", "1.00"," TIRANT ", "1.16E-02", "1.00E-06", "0.96", "0.96", "6.12E-09"
    "B3", "0.10", "0.05", "0.05", "0.95", "0.95", "0.00", "0.00E-06", "0.85", "0.85", "9.35E-40" BIELLE
    "T5", "0.10", "0.05", "0.05", "0.15", "0.15", "0.95"," TIRANT ", "1.06E-02", "1.00E-06", "0.90", "0.90", "4.83E-09"


Table 3.4-1. **Optimized structure:D_ PLAN, SCHEMA =** **TOPO**