C modeling ============== Characteristics of modeling ----------------------------------- Loads are applied progressively to the end nodes (X=1) of the model beam beam: * step 1: gravity loading * step 2: thermal loading (rise from 20 to 300°C) * step 3: irradiation loading (fluence from 20 to 33.1024 neutrons/m²) .. _DdeLink__7598_3686606288: .. _DdeLink__7594_3686606288: * step 4: loading beam with normal force Fx = 1E7n .. _DdeLink__7596_3686606288: * step 5: loading beam shear force Fy = 1E7n * step 6: loading beam shear force Fz = 1E7n .. _DdeLink__7600_3686606288: * step 7: reversal loading with normal force Fx = - Fx .. _DdeLink__7602_3686606288: * step 8: reversal loading beam shear force Fy = - Fy * step 9: reversal loading beam shear force Fz = - Fz The opposite end (X=0) is the object of a solid body condition allowing a coupling between the unit rotations of the beams and the generalized rotations of the whole (i.e. the grid rotations in the skeleton element model). Results ---------- The homogenized force field calculated at the node (X=0) using the beam beam model is established as follows for the nine time steps: .. csv-table:: "Not", "Fx", "Fy", "Fy", "Fz", "Fz", "Mz", "Mgx", "Mgy", "Mgz" "1", "483.85", "0. ", "0. ", "0. ", "0. ", "0. ", "0. ", "-290.315", "-48.385" "2", "483.85", "0. ", "0. ", "0. ", "0. ", "0. ", "0. ", "-290.315", "-48.385" "3", "483.85", "0. ", "0. ", "0. ", "0. ", "0. ", "0. ", "-290.315", "-48.385" "4", "-4999516", "0. ", "0. ", "0. ", "0. ", "0. ", "0. ", "2999709", "499951" "5", "-4999516", "-5000000", "0. ", "0. ", "2.908", "-4043821", "-4043821", "-3000000", "2999706", "377106" "6", "-4999516", "-5000000", "-5000000", "-5000000", "0. ", "4043827", "-4043824", "-4043824", "-3500000", "3122548", "377109" "7", "5000483", "-5000000", "-5000000", "-5000000", "0. ", "4043827", "-4043824", "-4043824", "-3500000", "-2877451", "-622890" "8", "5000483", "5000000", "5000000", "-5000000", "0. ", "4043821", "4043818", "4043818", "" 2500000", "-2877445", "-377200" "9", "5000483", "5000000", "5000000", "5000000", "0. ", "-4043827", "4043824", "4043824", "3500000", "-3123129", "-377206"