Summary of results
======================


Comparison with the elastic case
---------------------------------


.. image:: images/100000000000034A00000253393C4EBAD368509B.png
    :width: 6.8866in
    :height: 4.8665in


.. _RefImage_100000000000034A00000253393C4EBAD368509B.png:

A graphical representation of the force-displacement response of the Lee gantry is presented above, where the response has been shown in the case of an elastic structure (obtained with the same modeling in *Code_Aster*).

It is interesting to note how the addition of elasto-plastic behavior completely modifies the response of the structure from the first plasticization.


Synthesis
--------

Overall, the error committed during travel never exceeds 5%, which must be compared to the uncertainty about the solution, which is around 5%. Moreover, as explained, carrying out tests on values is difficult in the presence of control.

If we look at the figure above, we notice a good correlation between the reference response and that obtained by*Code_Aster*. In particular, the change in appearance due to the first plasticization is well described.