F modeling
==============


Characteristics of modeling
-----------------------------------

**Modeling** **AXIS :** 1 QUAD8


.. image:: images/10000201000001460000012720DCAD1E9600696E.png
    :width: 2.1563in
    :height: 1.952in


.. _RefImage_10000201000001460000012720DCAD1E9600696E.png:

The imposed load is as follows:


* Side :math:`\mathrm{L41}` is stuck in the :math:`y` direction,


* The :math:`\mathrm{L23}` side is moved from :math:`2\mathrm{mm}` to :math:`2000s`, :math:`0.2s`, or :math:`0.002s` in 100 increments.

The law of behavior tested is law VMIS_ISOT_LINE


Tested sizes and results
------------------------------

The reaction force on face :math:`\mathrm{L23}` is tested for the 3 deformation rates for the displacement values: :math:`\mathrm{0.1mm}`, :math:`\mathrm{1mm}` and :math:`\mathrm{2mm}`.

**Movement** :math:`U=0.1\mathrm{mm}`


.. csv-table::

    "**Identification**", "**Reference**", "**Aster**", ":math:`\text{\%}` **difference**"
    "Slow speed", "249.468", "249.513", "0.018"
    "Average speed", "278.422", "278.473", "0.018"
    "Fast speed", "316.416", "316.474", "0.018"


**Movement** :math:`U=1\mathrm{mm}`


.. csv-table::

    "**Identification**", "**Reference**", "**Aster**", ":math:`\text{\%}` **difference**"
    "Slow speed", "216.706", "216.711", "0.002"
    "Average speed", "231.289", "231.296", "0.003"
    "Fast speed", "250.426", "250.434", "0.003"


**Movement** :math:`U=2\mathrm{mm}`


.. csv-table::

    "**Identification**", "**Reference**", "**Aster**", ":math:`\text{\%}` **difference**"
    "Slow speed", "180.379", "180.370", "-0.005"
    "Average speed", "189.542", "189.533", "-0.005"
    "Fast speed", "201.566", "201.557", "-0.005"