B modeling
==============


Characteristics of modeling
-----------------------------------

This is a POU_D_EM element (multi-fiber beam). The maximum displacement at point B is :math:`0.021m`, it is reached in 50 increments.


Characteristics of the mesh
----------------------------

Number of knots: 11

Number of meshes and type: 10 (SEG2)


Tested sizes and results
------------------------------

The maximum efforts (in :math:`N`) are:


.. csv-table::

    "**Identification**", "**Imposed Travel (** :math:`m` **)**", "**Reference**"
    "0% corrosion", "0.019", "21857.1"
    "2.5% corrosion", "0.0164", "21451.6"
    "13% corrosion", "0.0075", "19610.1"


the efforts corresponding to the maximum displacement at point :math:`B` are:


.. csv-table::

    "**Identification**", "**Imposed Travel (** :math:`m` **)**", "**Reference**"
    "0% corrosion", "0.02", "21193.7"
    "2.5% corrosion", "0.018", "20557.6"
    "13% corrosion", "0.008", "18758.6"


The maximum cumulative equivalent plastic deformation is equal to:


.. csv-table::

    "**Identification**", "**Imposed displacement (m)**", "**Reference**"
    "0% corrosion", "0.02", "0.19625"
    "2.5% corrosion", "0.018", "0.17636"
    "13% corrosion", "0.008", "0.07668"


The damage is worth:


.. csv-table::

    "**Identification**", "**Imposed Travel (** :math:`m` **)**", "**Reference**"
    "0% corrosion", "0.0192", "0.00229"
    "2.5% corrosion", "0.0164", "0.01371"
    "13% corrosion", "0.0075", "0.01188"