B modeling
==============

Characteristics of modeling
-----------------------------------

POU_D_T_GD items

In order not to disturb the solution, the values of the flexural inertias are chosen arbitrarily small: for a section of area :math:`2.2783E-4`, :math:`\mathrm{IY}=\mathrm{IZ}=1.0E-4` is set

However, it should be noted that values cannot be taken smaller without causing errors in the resolution.


Characteristics of the mesh
----------------------------

27 items POU_D_T_GD


Tested sizes and results
------------------------------

.. csv-table::

    ":math:`\mathrm{DZ}(C)` (:math:`m`)", "**Instant**", "**Point**", "**Identification**", "**Reference**", ":math:`\text{\%}` **difference**"
    "", "0. ", "C", ":math:`\mathrm{DZ}` ", "—6.352", "0.4"
    "", "1. ", "C", ":math:`\mathrm{DZ}` ", "—8.195", "0.2"