B modeling
==============

Characteristics of modeling
-----------------------------------

The modeling used in the test case is as follows:

**Elements** :math:`\mathrm{2D}` **'** AXIS **' (** QUA4 **)**


.. image:: images/Shape3.gif


.. _RefSchema_Shape3.gif:

**Figure** 4.1-a: **Geometry and mesh of the modeling used.**

Cutting: 1 QUAD4 mesh along the :math:`x` axis

 1 QUAD4 mesh along the :math:`y` axis

Knots:

:math:`A`: knit :math:`\mathrm{M1}` knot :math:`\mathrm{N1}`

:math:`B`: knit :math:`\mathrm{M1}` knot :math:`\mathrm{N2}`

:math:`C`: knit :math:`\mathrm{M1}` knot :math:`\mathrm{N3}`

:math:`D`: knit :math:`\mathrm{M1}` knot :math:`\mathrm{N4}`

It is a creep test at constant pressure on an axisymmetric element.


Characteristics of the mesh
----------------------------

Number of knots: 4

Number of meshes and types: 1 QUAD4, 3 SEG2.


Tested sizes and results
------------------------------

.. csv-table::

    "**Identification**", "**Field**", "**Size**", "**Reference**", "**Tolerance**"
    ":math:`t=\mathrm{2000s}` :math:`\mathrm{N4}` "," DEPL ", "DY", "3.0101E-03", "1.00E -04%"
    ":math:`t=\mathrm{2000s}` :math:`\mathrm{M1}` Point 1"," VARI_ELGA ", "V2", "2.0000E+03", "1.00E-04%"
    ":math:`t=\mathrm{2000s}` :math:`\mathrm{M1}` :math:`\mathrm{N2}` "," EPSI_ELNO "," EPYY ", "3.0101E-03", "1.00E -04%"