Modeling A
==============

Characteristics of modeling
-----------------------------------

The modeling used in the test case is as follows:

**Elements** :math:`\mathrm{2D}` **'** AXIS **' (** QUA4 **)**


.. image:: images/Shape2.gif


.. _RefSchema_Shape2.gif:

**Figure** 3.1-a: **Geometry and mesh of the modeling used.**

Cutting: 1 QUAD4 mesh along the :math:`x` axis

 1 QUAD4 mesh along the :math:`y` axis

Knots:

:math:`A`: knit :math:`\mathrm{M1}` knot :math:`\mathrm{N1}`

:math:`B`: knit :math:`\mathrm{M1}` knot :math:`\mathrm{N2}`

:math:`C`: knit :math:`\mathrm{M1}` knot :math:`\mathrm{N3}`

:math:`D`: knit :math:`\mathrm{M1}` knot :math:`\mathrm{N4}`


Characteristics of the mesh
----------------------------

Number of knots: 4

Number of meshes and types: 1 QUAD4, 3 SEG2.


Tested sizes and results
------------------------------

.. csv-table::

    "**Identification**", "**Field**", "**Size**", "**Reference**", "**Tolerance**"
    ":math:`t=\mathrm{200s}` :math:`\mathrm{M1}` Point 1"," SIEF_ELGA "," SIYY "," ", "-5.40000000E+02", "1.00E -04%"
    ":math:`t=\mathrm{200s}` :math:`\mathrm{N2}` "," DEPL ", "DX", "4.11705882E-03", "1.00E -04%"
    ":math:`t=\mathrm{200s}` :math:`\mathrm{M1}` Point 1"," VARI_ELGA ", "V1", "V1", "4.32941176E-04", "1.00E -04%"
    ":math:`t=\mathrm{400s}` :math:`\mathrm{M1}` Point 1"," SIEF_ELGA "," SIYY "," ", "-6.15143448E+02", "1.00E -04%"
    ":math:`t=\mathrm{400s}` :math:`\mathrm{N2}` "," DEPL ", "DX", "8.92077868E-03", "1.00E -04%"
    ":math:`t=\mathrm{400s}` :math:`\mathrm{M1}` Point 1"," VARI_ELGA ", "V1", "V1", "3.21321491E-03", "1.00E -04%"