v6.01.121 SSNA121 - Concrete tube subjected to internal pressure with model BETON_UMLV

Summary:

The objective of this test is to validate the correct consideration of tensile states to treat concrete creep, model BETON_UMLV, under these tensile stress states. The test consists in applying internal pressure to a concrete tube modelled under axisymmetric conditions.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
  • 2.3. Uncertainties about the solution
  • 2.4. References
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. Summary of results