C modeling
==============


Characteristics of modeling
-----------------------------------

Modeling is AXIS. The contact algorithm used is' PENALISATION ', the normal used is an average of the master and slave normals.


Characteristics of the mesh
----------------------------

Knots: 4610

Meshes: 1348 QUAD8, 114 TRIA6


.. image:: images/10000000000004B700000304F3ED532877F1B25E.png
    :width: 3.9252in
    :height: 4.2008in


.. _RefImage_10000000000004B700000304F3ED532877F1B25E.png:


Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference value**", "**Tolerance**"
    ":math:`\mathit{DY}` at point :math:`\mathit{PA4}` ", "'SOURCE_EXTERNE'", "-0.81 :math:`\mathit{mm}` ", "4.0%"
    ":math:`\mathit{DY}` at point :math:`\mathit{PA4}` ", "'NON_REGRESSION'", "", ""
    ":math:`\mathit{FY}` on the edge :math:`\mathit{LBC4}` ", "'SOURCE_EXTERNE'", "17229.58 :math:`N` ", "1.6%"
    ":math:`\mathit{FY}` on the edge :math:`\mathit{LBC4}` ", "'NON_REGRESSION'", "", ""