v5.03.109 SDNV109 — Full volume cylinder rotating around its axis, taking into account gyroscopy

Summary:

This test makes it possible to validate the calculation of the rotation modes of a solid model with and without gyroscopic stiffness.

It is a simple model of a full cylinder, free to rotate around its axis. This example is taken from the reference [1].

The results of the calculations are compared with those obtained with ANSYSÒ. The results coincide perfectly with the reference solution.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Results: comparison between Code_Aster and ANSYS calculations
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Results: comparison between Code_Aster and ANSYS calculations
• 5. Summary of results