v4.61.102 MTLP102 - Metallurgical calculation for steel taking into account grain size

Summary:

The purpose of this test is to observe the evolution of grain size as a function of temperature change in the case of steel.

The grain size is calculated at nodes \(A\), \(B\), and \(C\) by the CALC_META operator.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Benchmark results
  • 2.2. Uncertainty about the solution compared to the non-regression result
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested values
• 4. Comments