C modeling
==============


Characteristics of modeling
-----------------------------------

Since the cylinder is supposed to be infinite, we only mesh a slice of height :math:`H=40\mathrm{mm}`.


.. image:: images/100000000000028600000144808F60A6192B761B.jpg
    :width: 6.889in
    :height: 3.4547in


.. _RefImage_100000000000028600000144808F60A6192B761B.jpg:


Characteristics of the mesh
----------------------------

Number of knots: 637

Number of meshes and types: 216 HEXA8, 432 PENTA6


Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference value**", "**Precision** (%)"
    "Max (:math:`\mathit{TEMP}`) — GROUP_NO 'M1'", "'ANALYTIQUE'", "289.0", "0.1"
    "M1 (r=443.33)", "", "", ""
    "t = 12. ", "'AUTRE_ASTER'", "288.64", "0.5"
    "t = 100. ", "'AUTRE_ASTER'", "202.76", "0.1"
    "t = 600. ", "'AUTRE_ASTER'", "93.027", "0.1"
    "t = 2000. ", "'AUTRE_ASTER'", "29.419", "0.1"
    "", "", "", ""
    "M2 (r=469.67)", "", "", ""
    "t = 12. ", "'AUTRE_ASTER'", "289.00", "0.1"
    "t = 100. ", "'AUTRE_ASTER'", "275.04", "0.5"
    "t = 600. ", "'AUTRE_ASTER'", "143.00", "0.1"
    "t = 2000. ", "'AUTRE_ASTER'", "35.858", "0.5"
    "", "", "", ""
    "M'1 (r = 443.33)", "", ""
    "t = 12. ", "'AUTRE_ASTER'", "288.64", "0.5"
    "t = 100. ", "'AUTRE_ASTER'", "202.76", "0.1"
    "t = 600. ", "'AUTRE_ASTER'", "93.027", "0.1"
    "t = 2000. ", "'AUTRE_ASTER'", "29.419", "0.1"
    "", "", "", ""
    "M'2 (r = 469.67)", "", ""
    "t = 12. ", "'AUTRE_ASTER'", "289.00", "0.1"
    "t = 100. ", "'AUTRE_ASTER'", "275.04", "0.5"
    "t = 600. ", "'AUTRE_ASTER'", "143.00", "0.1"
    "t = 2000. ", "'AUTRE_ASTER'", "35.858", "0.5"