Modeling A
==============


Characteristics of modeling
------------------------

3D modeling is used_ DIAG.


.. image:: images/100000000000021D0000022508FCBD4C0E7F6D7F.png
    :width: 2.3953in
    :height: 2.3701in


.. _RefImage_100000000000021D0000022508FCBD4C0E7F6D7F.png:


Characteristics of the mesh
----------------------------

The mesh contains 320 elements of type HEXA8.


Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference value**", "**Tolerance**"
    "Dot NI - :math:`\mathrm{TEMP}` ", "'SOURCE_EXTERNE'", "", ""
    "t=50s", "", "-151.52"," 2.00%"
    "t=51s", "", "-143.51"," 2.00%"
    "t=72s", "", "-55.17"," 0.50%"
    "t=200s", "", "-127.18"," 0.50%"
    "Point NC - :math:`\mathrm{TEMP}` ", "'SOURCE_EXTERNE'", "", ""
    "t=50s", "", "99.85"," 0.50%"
    "t=72s", "", "88.24"," 0.50%"
    "t=200s", "", "22.43"," 0.50%"


The values obtained with *Code_Aster* in version 10.3.18 are tested in 'NON_REGRESSION' with an accuracy of :math:`\text{0,1\%}`.