v4.24.001 TTNP01 — STEFAN problem with lumped elements - QUAD9

Summary:

This test case validates modeling PLAN_DIAG in non-linear thermal technology in the case of a thermal shock.

The results obtained are compared with an analytical solution.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Reference quantities
  • 2.2. Benchmark result
• 3. Modeling A
  • 3.1. Characteristics of modeling A
  • 3.2. Results
• 4. Summary of results