v4.23.303 TTLP303 - Heat transfer in an orthotropic plate: imposed temperatures

Summary:

This test is the result of the independent validation of thermal version 3.

Analysis:	Linear transient thermal
Problem:	2D plane
Features tested:	thermal element shell flat thermal element orthotropic material transient thermal algorithm limit conditions: imposed temperatures
Interest of the test:	orthotropic material analytical solution
Number of models:	1 shell modeling 1 plane modeling

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical references
• 3. C modeling
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. notes
• 4. C modeling results
  • 4.1. Tested values
• 5. Summary of results