B modeling results
==============================

Tested values
---------------

.. csv-table::

    "**Identification**", "**Reference**", "**Aster**", "**% difference**", "**tolerance**"
    "Temperature :math:`(°C)` ", "", "", "", ""
    "Node N1 t = 0.1s", "0.330", "0.330", "0.330", "0.129"," 1%"
    "'' t = 0.3s", "0.544", "0.544", "0.543", "0.149"," 1%"
    "'' t = 0.5s", "0.682", "0.682", "0.681", "0.154"," 1%"
    "'' t = 0.7s", "0.789", "0.789", "0.788", "0.092"," 1%"
    "'' t = 1.0s", "0.918", "0.918", "0.920", "0.222"," 1%"
    "N8 node t = 0.1s", "0.330", "0.330", "0.330", "0.129"," 1%"
    "'' t = 0.3s", "0.544", "0.544", "0.543", "0.149"," 1%"
    "'' t = 0.5s", "0.682", "0.682", "0.681", "0.154"," 1%"
    "'' t = 0.7s", "0.789", "0.789", "0.788", "0.092"," 1%"
    "'' t = 1.0s", "0.918", "0.918", "0.920", "0.222"," 1%"
    "", "", "", "", ""
    "Node N121 t = 0.1s", "0.004", "0.004", "0.004", "**10.931**", "1%"
    "'' t = 0.3s", "0.071", "0.071", "0.071", "**0.242**", "1%"
    "'' t = 0.5s", "0.160", "0.160", "0.161", "0.587"," 1%"
    "'' t = 0.7s", "0.247", "0.247", "0.251", "1.619"," 1%"
    "'' t = 1.0s", "0.366", "0.366", "0.380", "**3.95**", "1%"
    "N126 node t = 0.1s", "0.004", "0.004", "0.004", "**10.931**", "1%"
    "'' t = 0.3s", "0.071", "0.071", "0.071", "**0.242**", "1%"
    "'' t = 0.5s", "0.160", "0.160", "0.161", "0.587"," 1%"
    "'' t = 0.7s", "0.247", "0.247", "0.251", "1.619"," 1%"
    "'' t = 1.0s", "0.366", "0.366", "0.380", "**3.95**", "1%"



notes
---------

The relative error is at most 3.95%, except for :math:`x=1` at the moment :math:`t=\mathrm{0.1s}` the error is 11%. This error was obtained for the lowest temperature value (:math:`T=0.004°C`). This difference is explained by the fact that the error function at this point is 0.025347 and that the uncertainty in calculating the error function is unknown.