B modeling
==============


Characteristics of modeling
-----------------------------------

**TRIA6, QUAD9**

For reasons of symmetry, we mesh only half the thickness of the wall. The modeling is done on a height :math:`H=0.1m` with 2 layers of elements.


.. image:: images/10000D2200002FDA00001815202BC50F6DCFD53E.svg
    :width: 645
    :height: 322


.. _RefImage_10000D2200002FDA00001815202BC50F6DCFD53E.svg:


Characteristics of the mesh
----------------------------

Number of knots: 55

Number of meshes and types: 5 QUAD9, 10 TRIA6


Tested values
---------------


.. csv-table::

    "**Identification**", "**Reference**", "**Aster**", "**% difference**"
    ":math:`\mathrm{M1}(x=0.02)\mathrm{N18}` ", "", "", ""
    ":math:`t=0.1` ", "100.00", "100.00", "+0.00"
    ":math:`t=0.5` ", "99.408", "99.278", "—0.13"
    ":math:`t=2.0` ", "79.859", "79.898", "+0.05"
    ":math:`t=10.0` ", "15.717", "16.043", "+2.07"
    "", "", "", ""
    ":math:`\mathrm{M2}(x=0.08)\mathrm{N49}` ", "", "", ""
    ":math:`t=0.1` ", "93.666", "94.077", "+0.44"
    ":math:`t=0.5` ", "63.500", "63.979", "+0.75"
    ":math:`t=2.0` ", "35.717", "35.825", "+0.30"
    ":math:`t=10.0` ", "6.7948", "6.9321", "+2.02"
    "", "", "", ""
    ":math:`M’1(x=0.02)\mathrm{N12}` ", "", "", ""
    ":math:`t=0.1` ", "100.00", "100.00", "+0.00"
    ":math:`t=0.5` ", "99.408", "99.311", "—0.10"
    ":math:`t=2.0` ", "79.859", "80.101", "+0.30"
    ":math:`t=10.0` ", "15.717", "16.093", "+2.39"
    "", "", "", ""
    ":math:`M’2(x=0.08)\mathrm{N30}` ", "", "", ""
    ":math:`t=0.1` ", "93.666", "93.469", "—0.21"
    ":math:`t=0.5` ", "63.500", "62.860", "—1.01"
    ":math:`t=2.0` ", "35.717", "35.641", "—0.21"
    ":math:`t=10.0` ", "6.7948", "6.9068", "+1.65"