v4.05.300 TPLP300 - Rectangular plate: convection, imposed temperature

Summary:

This test is the result of the independent validation of version 3 in linear stationary heat.

It is a 2D plane problem represented by a single modeling (plane).

The functionalities tested are the use of flat thermal elements under limited conditions of imposed temperature and convection.

The results are compared with those provided by NAFEMS.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. Summary of results