v4.03.100 TPLS100 - Infinite plate subject to antisymmetric flows

Summary:

The aim of this test is to test the model of a linear thermal shell with three fields (MODELISATION: “COQUE” or “COQUE_PLAN”) by comparison with an analytical solution, for an infinite plate subjected to a pair of antisymmetric heat flows that are stationary on its two half-faces, in steady state.

The heat equation is solved stationary, with linear, isotropic, homogeneous conduction.

Two models: A for finite surface shell elements (triangles) and B for line elements (segments).

In each model, the elementary commands and the global command THER_LINEAIRE are tested simultaneously.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
• 5. Summary of results