B modeling
==============


Characteristics of modeling
-----------------------------------

**AXIS (TRIA3)**


.. image:: images/1000000000000220000000AE32ACEBB12F9690F6.png
    :width: 5.5374in
    :height: 1.8709in


.. _RefImage_1000000000000220000000AE32ACEBB12F9690F6.png:


Characteristics of the mesh
----------------------------


.. csv-table::

    "Number of knots:", "604"
    "Number of meshes and types:", "900 TRIA3 (and 150 SEG2)"



Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", "**Reference**", "**tolerance**"
    "Temperature (:math:`°C`)", "", ""
    "", "", ""
    ":math:`z\mathrm{=}0.0` :math:`r\mathrm{=}.0` (:math:`\mathit{n1}`: :math:`A`)", "0.0000", ".00001"
    ":math:`r\mathrm{=}.01` (:math:`\mathit{n4}`: :math:`D`)", "0.0000", ".00001"
    ":math:`z\mathrm{=}0.1` :math:`r\mathrm{=}.0` (:math:`\mathit{n61}`)", "0.3694"," 1%"
    ":math:`r\mathrm{=}.01` (:math:`\mathit{n64}`)", "0.3694"," 1%"
    ":math:`z\mathrm{=}0.2` :math:`r\mathrm{=}.0` (:math:`\mathit{n121}`)", "0.9718"," 1%"
    ":math:`r\mathrm{=}.01` (:math:`\mathit{n124}`)", "0.9718"," 1%"
    ":math:`z\mathrm{=}0.3` :math:`r\mathrm{=}.0` (:math:`\mathit{n181}`)", "2.1870"," 1%"
    ":math:`r\mathrm{=}.01` (:math:`\mathit{n184}`)", "2.1870"," 1%"
    ":math:`z\mathrm{=}0.4` :math:`r\mathrm{=}.0` (:math:`\mathit{n241}`)", "4.7815"," 1%"
    ":math:`r\mathrm{=}.01` (:math:`\mathit{n244}`)", "4.7815"," 1%"
    ":math:`z\mathrm{=}0.5` :math:`r\mathrm{=}.0` (:math:`\mathit{n301}`)", "10.392"," 1%"
    ":math:`r\mathrm{=}.01` (:math:`\mathit{n304}`)", "10.392"," 1%"
    ":math:`z\mathrm{=}0.6` :math:`r\mathrm{=}.0` (:math:`\mathit{n361}`)", "22.555"," 1%"
    ":math:`r\mathrm{=}.01` (:math:`\mathit{n364}`)", "22.555"," 1%"
    ":math:`z\mathrm{=}0.7` :math:`r\mathrm{=}.0` (:math:`\mathit{n421}`)", "48.944"," 1%"
    ":math:`r\mathrm{=}.01` (:math:`\mathit{n424}`)", "48.944"," 1%"
    ":math:`z\mathrm{=}0.8` :math:`r\mathrm{=}.0` (:math:`\mathit{n481}`)", "106.20"," 1%"
    ":math:`r\mathrm{=}.01` (:math:`\mathit{n484}`)", "106.20"," 1%"
    ":math:`z\mathrm{=}0.9` :math:`r\mathrm{=}.0` (:math:`\mathit{n541}`)", "230.44"," 1%"
    ":math:`r\mathrm{=}.01` (:math:`\mathit{n544}`)", "230.44"," 1%"
    ":math:`z\mathrm{=}1.0` :math:`r\mathrm{=}.0` (:math:`\mathit{n601}`: :math:`B`)", "500.00", ".00001"
    ":math:`r\mathrm{=}.01` (:math:`\mathit{n604}`: :math:`C`)", "500.00", ".00001"


(*: Imposed temperature)


notes
---------

Volume heat :math:`\rho {C}_{P}` is not a step in this test, but must be declared for the*Code_Aster*. We take :math:`\rho {C}_{P}=1.0J/{m}^{\mathrm{3 }}°C`.