v4.01.004 TPLA04 - Power release in a hollow cylinder

Summary:

This test is the result of the independent validation of version 3 in linear stationary heat.

It includes 2D axisymmetric modeling that tests thermal axisymmetric elements, imposed temperature boundary conditions, and heat source-type boundary conditions.

The objective of this test is to validate the consideration of the heat source by comparing the results obtained with those provided by VPCS.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. notes
  • 3.4. Tested sizes and results
• 4. Summary of results